Birch plywood (Riga Ply) overlaid with a film on both faces. The wear face has a smooth wire mesh pattern (WH); the reverse normally is smooth, although it can have wire mesh pattern, too. Riga Smooth Mesh wire mesh overlay is decorative and resists hard wear.
Colors:
E1
CARB EPA ULEF
FSC certificate
Plywood Handbook 2017
Environmental product declaration – RIGA plywood
Dark brown (120, 130 (wear resistant), 167 and 220 g/m2)
Light brown (120 g/m2)
Black (120 g/m2)
Silver Grey (220 g/m2)
Light Grey (220 g/m2)
Yellow non - transparent (167 g/m2)
Blue (UV resistant, 200 g/m2)
Red (220 g/m2)
Green (120 g/m2)
Our specialists will advise the most appropriate overlay depending on end use and film availability.
A smooth phenol or UV resistant film, which is hot-pressed onto the surface, is used as an overlay. The phenol film is composed of a basic paper which is impregnated with phenol resin. The UV resistant film is impregnated with special thermosetting mixture of polymers containing amino resins. Riga Smooth Mesh have smooth wire mesh pattern imprinted in hot pressing process.
On special request, panels can be overlaid with multi layer phenol film thus giving superior wear resistance of overlay. The overlaying film can be the same on both faces or it can differ.
Wire mesh pattern can be of two kinds:
Large Mesh - 2.5 mesh per 1cm
Small Mesh - 4.5 mesh per 1cm
The smooth wire mesh surface has high resistance to wear, it is decorative, weather- and water-proof, and resists to commonly used chemicals, easy-to-clean. In addition, the product is environmentally friendly.
For walls and applications where high wear resistance and/or decorativeness is required.
Panel sizes
1220 mm x 2440 / 3050 mm
1250 mm x 2500 / 3000 mm
1500 mm x 2500 / 3000 mm
1525 mm x 3050 / 3660 mm
2150 mm x 3050 / 3340 / 3850 mm
Cut-to-size panels and machined panels available in accordance with the customers’ requirements.
Thicknesses
6.5, 9, 12, 15, 18, 21, 24, 27, 30, 35, 40, (45, 50) mm
